FAQs for Diesel Saver Grade DS 70

 

1. Where to Use Dinlog Diesel Saver Grade 70?

For use in MCVs, Big Vans, Tractors of 65 HP to 80 HP or above 2500cc engines. Useful for Generators and Boats also of above HP.

Not for use in LCVs, HCVs.

 

2. Is Dinlog good for engines? How?

Yes. Dinlog is very good for Diesel engines because:

  1. Engine Heating is reduced and Engine becomes cool.
  2. When heat is reduced wear & tear of the engine is reduced; so Dinlog extends the useful life of Diesel engines.
  3. Dinlog reduces engine vibrations & noise.
  4. Prevents formation of carbon soot inside engine valves and nozzle.
  5. Smoke and CO is reduced considerably.

 

3. Dinlog is very Costly. Why one should buy Dinlog?

No. Dinlog is not costly. It is very economical.

          Dinlog DS 70 is at Rs.125/30ml. One ml is about 30 drops. 30 ml is 900 drops which can be used for about 450 ltrs of Diesel. Thus cost of Dinlog DS 70 for one litre of Diesel works out to just 28 paise against a guaranteed savings of Rs.4/ltr (10% savings assumed) . Where as the user experience suggests a much higher savings at 15~25%. So Dinlog DS 70 is very very economical product. In addition to fuels savings it confers many other benefits.

 

4. What are the other Benefits?

The other benefits are too good as below:

  1. Dinlog is eco friendly. Since CO is greatly reduced, Dinlog prevents Global Warming.
  2. Savings is very high for large fleet operators.
  3. Engine life is increased. Even a  LCV\ due for engine re-boring can be run for further one or two years without re-boring since engine pick up increases by 30%.
  4. Our another product of Dinlog is “Tyre Saver” is expected to increase Trye life by 70%.

 

 

5. Why so small dosage? What will happen if we put more?

          Dinlog is a very powerful Catalyst. So add only what is prescribed by using suitable Measuring Syringe and Measuring Chart. Do not put extra or less.

          You may put 5% less or 5% more to fix correct dosage for your Vehicle.

          Dosage chart is given for different type of MCVs, Big Vans, Big Jeeps run in India.

          If you put 2 drops/10 ltr less the engine becomes very powerful and may consume more diesel.

          If you put 2 drops/10 ltrs more the engine RPM increases and no diesel savings is achieved.

          If you put 5 ml more or less no effect is felt.

          Correct dosages leads to more mileage.

 

6. Drivers will not Co-operate. How to get Driver Co-operation?

Drivers will certainly Co-operate. Because:

          Dinlog makes driving a old LCV very easy like driving a brand new Vehicle.

          No fatigue or feet pain while pressing Accelarator pedal even when going long distances.

          Ease and Confidence while overtaking, climbing hills, avoidance of gear changing even in low speed.

          A cool engine pleases the Drivers the most.

          Less smoke, no eye burning makes the Drivers happy.

          Driving becomes a pleasure and not a pain.

 

7. Is Dinlog a Chemical? What is inside the bottle?

Dinlog is not a Chemical. It is a Catalyst.

          Dinlog is a Catalyst in Diesel form so it can be easily mixed with Diesel in the Tank.

          The Catalyst is not visible since it is in Energy form. It is called “Empowering”.

          The Catalyst is a secrect one based on 8 years of R & D.

          It is ike power inside a battery Cell. (Invisible)

          Harmless and good for Diesel Engines.

          The content is “Diesel suitably empowered”.

 

8. What are the Approvals & Licenses for Dinlog?

No need for Licenses or Approvals.

          License is required in India only for manufacturing Aeroplanes, Ships, Cars, Medicines not for Fuel Savers.

          Approvals are not “Mandatory”, just “Accreditations”. Not compulsory for new products.

          Moreover Dinlog is Eco friendly.

 

9. Can we use Dinlog with Kerosene? Yes. Dinlog is very good for Kerosene also.

          The Vehicle will run like running on Super Power Diesel.

          Engine heat will reduce totally.

          Engine will become very smooth.

          Pick up and Power will be very high.

          Savings is more in Kerosene than in Diesel.

          No need to add grease, oil paste, thick oil etc. with Kerosene which cost 50 paise/ltr.

          Just add Dinlog at a cost of 20 to 25 paise/ltr.

Note: Running Vehicle with Kerosene is illegal.

 

10. How to buy Dinlog? What Packings available?

You can buy Dinlog from Manufacturer appointed

Dealer /Agent in your area.

          The Price is Rs.125 for 30ml

          One Measuring Syringe and One Dosage Chart suitable for your MCV is given free with Dinlog.

          Packing available is 30ml.

          Continuous supply is ensured by Manufacturers i.e. Dlog Technologies, Chennai.

          If you are afraid of shortages you can buy and keep Dinlog which has a minimum shelf life of 5 years.

 

11. For how many litres of Diesel a 30 ml Dinlog bottle can be used?

          For about 400 to 700 litres depending on the dosages

          Note: Approximately.

 

12. How Dinlog works?

          Dinlog enriches the Diesel.

          Enhances Oxygen permeability in Diesel vapour.

          Completely burn the Diesel inside engine.

          Increases both Power and RPM of the engine.

          Vehicle runs very fast with less acceleration.

 

13. Dinlog Diesel Saver – Dosages

 

14. How to extract more mileage from Dinlog Diesel Saver?

          Drive slowly and don’t shift gears unnecessarily.

          Correct dosage leads to more mileage.

          Find correct dosage for your Van/ LCV by adjusting dosage by + or – 5% or + 5%

          Now and then try + or – 1 or 2 drops/10 ltrs.

          If load is more put less 1 or 2 drops /10 ltrs

          If load is less put more 1 or 2 drops /10 ltrs

          Use regularly whenever diesel is filled in.

          Add Dinlog as soon as diesel is filled in.

          Read User Instructions fully before using Dinlog.

          Always Drive Slow and Safe.

          Read instructions ‘when to put 1 or 2 drops more or 1 to 2 drops less’.

 

15. when to put 1 or 2 drops more or 1 to 2 drops less?

 

Put 1or 2 drops/10 ltrs Less if:

Put 1 or 2 drops /10 ltrs More if:

When Vehicle is overloaded

Always running in top gear

While climbing Up hill

Less load or empty

Engine heating is high

Going down hill

Engine RPM high and engine Power is low

Engine Power is high and engine RPM is low

Good mileage in less load only or in empty

Oneway loaded Vehicles

Gear shift is required often

Good mileage only in overload conditions

Using Dinlog for very First time

Vehicle performance excellent but low mileage

 

16.  Instructions for Use

  1. First time fill the fuel tank fully and add Dinlog by using Measuring Syringe for the diesel in the tank (put first time dosage only)
  2. Second time onwards add Dinlog for the Diesel filled at that time only.  Don’t put less or more.
  3. Add Dinlog whenever Diesel is filled in immediately after or while filling Diesel.
  4. Shake Dinlog bottle once or twice gently before using it.
  5. Use Dosage Chart suitable for your Vehicle and measure correctly.
  6. Ensure proper and direct mixing with Diesel in the fuel tank. (Do not mix Dinlog in a separate bottle).
  1. Drive slow or at normal speed only.
  2. Drive at appropriate gear only. Change to higher gear quickly.
  3. Mileage improves step by step. So continue to use Dinlog if benefits are felt in the first use.
  4. First time Dinlog is effective after 20 kms only.
  5. Try 1 or 2 drops/10 ltrs less or more to get more mileage.
  6. Use Dinlog grade DS70 in MCVs, Big Vans, Big Jeeps or Tractors above 65hp only.

 

17. Dos & Don’ts

 

Dos

Don’ts

Use Dinlog regularly

Don’t skip using Dinlog

Add Dinlog immediately after or while filling Diesel. You may put Dinlog DS70 into Diesel tank 5 or 10 seconds before filling diesel so it may get mixed well with Diesel

Don’t add Dinlog some- time after filling Diesel. Don’t put Dinlog DS 70 in such a way it will not mix with diesel in the diesel tank.

You may mix two same batches of Dinlog.

Don’t mix two different batches of Dinlog.

Use Correct Dosage Chart and measure correctly

Don’t add extra  or less quantity

Now and then try 1 or 2 drops/10ltrs less or more

Don’t mix with Diesel in a separate bottle for using

 

18. What are Dinlog other products?

          The next product of Dinlog is “TYRE SAVER”

          Dinlog Tyre Saver is expected to double useful tyre life

          To be applied to the surface of Tyres like paint using a 4’ Brush every 5000 kms.

          The other products of Dinlog are:

  1. Petrol Saver for 2  & 3 Wheelers.
  2. Diesel Saver DS 60 for LCVs like TATA 407, Cars, Jeeps and Autorickshaws
  3. Diesel Saver DS 148 for HCVs like 6 Wheel Buses and Trucks from 90 HP to 120 HP
  4. Diesel Saver DS 150 for HCVs like 10/14/18 Wheel Trucks from 120 HP to 200 HP
  5. Health Care Products viz. Dinlog Kalonji, Curcuma, Sahjan, Komium, Hunaja, Gurmar, Nilvembu, etc.
  6. Hair Care Products viz. Hair Rejuvenator and Hair Rejuvenator Plus
  7. Plant Growth Promoter – Liquid Organic Manure.

 

19. Mileage increased initially; But now no increase in mileage. Why?

          If you put ¼ or ½ ml less initially you get good mileage. But subsequently this leads to reduction in mileage. This is called “Power Build up” which reduces mileage.

          To get good mileage again increase the dosage by 2 drops/10 ltrs. This increases RPM of the engine which will fetch good increase in mileage.

          Check if RPM is more or Power is more in the engine and adjust the dosage by 1 or 2 drops /10 ltrs more or less to get good mileage again.

          Read “How to get more mileage from Dinlog” given under para 15 here in.

 

20. No increase in mileage at all. Why?

          Read User Instructions again to check if you had followed every word there in.

          There is no chance for “nil” increase in mileage.

          Check your old mileage correctly and compare again.

          Ask your driver to go slowly or at normal speed to get increased mileage.

          Check increase in RPM or Power and adjust the dosage.

          Read Dos and Don’ts again and again.

          Read “How to get more mileage from Dinlog” and follow the instructions therein.

          Inspite of the above if there is no increase in mileage then contact Dealer / Manufacturers.

 

21. Reasons for Nil increase in mileage

  1. Dosage applied / Measuring Syringe used may be wrong. Check dosage and the Syringe.
  2. Diesel filled in may not be exactly 10 ltrs. It may be only 9.5 or 9.8 ltrs. So reduce dosage by 1 or 2 drops/10 ltrs. This will adjust the RPM / Power balance.
  3. Filter or Pump may have developed fault suddenly.
  4. Change in Driver.
  5. Sudden change in load, climatic conditions.
  6. Sudden change in road, traffic conditions.
  7. Dinlog was not added immediately after filling Diesel. It was added after sometime. This leads to “Power Build Up”, hence no good mileage.
  8. Use of wrong grade of Dinlog.
  9. Read “How to get good mileage from Dinlog” again given under Para 15 here in.

 

22. How Dinlog Bottle and Measuring Syringe look like?

            Please see the webpage.

 

23. Who is Dinlog manufacturers?

Dinlog Manufacturers are:

Dlog Technologies

First Floor, New No.21, Thambaiah Road Extn.,

West Mambalam, Chennai-33, India.

Mobile: 98401 70123.

Website: www.dinlog.com

Email: dlogtech@yahoo.co.in, dlogtech@gmail.com

 

24. Can I get Dinlog DS 70 in our Town? How can I get this product?

One can get this product anywhere in India. We are yet to export this product to other countries. If there is not Dinlog Agent / Dealer in your Town you can directly place order with us and purchase from us and we shall be glad to dispatch the goods by RPP or through Courier to your address. Minimum order value is Rs.500 [and the Packing and Forwarding (Courier/Postage) of Rs.100 is free in that Rs. 500]. Pleaser refer to Enquiry and Order Form for this purpose.