Do’s and Dont’s for Dinlog Petrol Saver Grade PS110

Do’s:

1. Use Dinlog PS110 regularly whenever Petrol is put into the petrol tank of bike.
2. Add Dinlog PS110 immediately after Petrol is put in.
3. First time alone put extra dosage of about 20% to get extra mileage from first time itself.
4. Keep the Dinlog PS110 bottle always in the bike as this must be put in immediately after filling Petrol
5. Keep the Dinlog PS110 bottle preferably upright to avoid leakage.
6. Keep Dinlog PS110 inside a small plastic cover to minimize percolation loses.
7. Now and then put half a drop less to maintain high mileage.
8. Slightly tilt the bike and make sure the Dinlog PS110 drops falls directly on to the Petrol inside the tank

Dont’s:

1. Avoid putting excess dosages
2. Do not add Dinlog PS110 some time after filling Petrol . Add it immediately after filling petrol.
3. Do not put Dinlog PS110 in the nights as more drops may fall into the petrol tank.
4. Do not put Dinlog PS110 before the Petrol is filled in.
5. Do not add Dinlog PS110 in a separate bottle with Petrol and then pour the Petrol into the tank.
6. Keep the Dinlog PS110 bottle away from fire and out of reach of Children.
7. If good mileage drops put reduced dosage and do not put normal dosages.