FAQ on Dinlog Tyre Saver
1.Q: What is Dinlog Tyre
Saver?
A: Dinlog
is the brand name.
2.Q: Such a small bottle of 40 nl. How to apply
on 67 Lorry Tyres?
A: This is only a concentrate. With
this you can make 4 litres of
3.Q: How to prepare
A: Take 4 litres or Kerosene in a 5 litre Jerry Can (Cleaned Can) and add this 40 ml Dinlog
4:Q: How
long we can store this
A: You can keep in store this
5.Q: This is just Kerosene now. How it can strengthen my Tyres?
A: This is not just Kerosene. This is Catalysed
Kerosene and this will penetrate up to 2 mm into the
6.Q: The price of Rs.595 for 40 ml is too costly. Why?
A: This is concentrate. With this 40
ml one can apply
7.Q: Where to get Kerosene?
A: We found it difficult to handle
Kerosene as a raw material. So we are avoiding this problem and requesting the
user to handle Kerosene at the end point.
8.Q: What is the Kerosene cost per tyre”
A : Assuming even Rs.50/ltr of Kerosene
it can be applied to more than 16 Lorry/Bus tyres.
So the cost of Kerosene per Lorry/Bus tyre
can be safely assumed at Rs.3/- only.
9.Q: What are the benefits of spending Rs.12/- per
A: The benefit is expected increase
in life of Bus/Lorry Tyres by 60%. In case of smaller
Vehicles the cost is also much less and expected increase in tyre life is 100%.
This is to be applied for Lorry tyres once in 10000 kms. We
expect with the same wear and tear the tyre will now
run for 16000 kms. This is a phenomenal savings
considering the cost of application..
10.Q: What
is the cost benefit analysis for Lorry/Bus Tyres?
For Lorry Tyres:
Application once in 10000 kms at a cost of Rs.12
each.
Assuming normal
10 applications plus additional 5
applications for every 10000 kms at Rs.12 each
Cost of
Expected Increase in
This is called phenomenal savings
i.e. 50 times payback .
For Bus Tyres:
Application once in 5000 kms at a cost of Rs.12 each.
Assuming normal
12 applications plus additional 6
applications for every 5000 kms at Rs.12 each
Cost of
Expected Increase in
This is called phenomenal savings
i.e. 42 times payback .
11.Q: Is it
not worth to apply Dinlog Tyre
Saver to LCVs or Cars or Vans?
A: One can apply DInlog
Tyre Saver mix to even Cycles. We noticed the tyre life goes beyond double in case of smaller vehicles
and tyres as the load is very less. It is most
advantageous to apply Dinlog Tyre
Saver mix to smaller vehicles like Cars, Jeeps, LCVs,
MCVs, Bikes, Scooters, Mopeds and even Cycles.
12.Q: What
happens if
A: Nothing happens you can apply at plus or minus 1000
kms of the recommended application kms.
13.Q: What
happens if instead of 60 ml per Lorry/Bus tyre 70 ml
or 80 ml is applied on to Tyres?
A: Nothing wrong happens. You just apply extra
quantity. 50 or 60 ml is sufficient.
14.Q: Can I
apply at more frequently than recommended applications?
A;Yes.
15.Q: How
to apply without wasting the mix?
A: Good question. Take the mix in a
small bowl in lots of 100ml or even lesser. Use a 2 inch or 4 inch synthetic
brush (ordinary painting brush) and apply the Dinlog Tyre Saver mix on to tyre buttons
and treads alone. As you apply it gets dried up. So mark where you start and
where to finish. If 10 or 20 ml is balance in the bowl apply it to the sides of
the tyres or throw it . Do
not put back into the Jerry Can of 4 litres as this
will spoil the purity of
16.Q: How
to measure the increase in life of my Tyres?
A. Again a good question. First
apply only to one tyre out of 4 or 6 tyres. Apply like this 2 or 3 times spread over 6 months time even. Mark the number the tyre
and the kms at which Dinlog
Tyre Saver is applied. Now after applying this mix for
over 2 or 3 times you will realize that only the Tyre
on which Dinlog Tyre Saver
mix is applied is not wearing out like other tyres.
You can find this tyre to be black and the buttons
remains intact and compared to other tyres this tyre is almost appearing like new and fresh without micro
holes on the buttons or surface. This way you can satisfy yourself that Dinlog Tyre Saver works and saves
tyre costs.
17Q: Can I apply straight away on
all the 10 Tyres in my Truck?
A.: Yes. If you know about your otherwise normal wear and tear or another truck
with 10 Tyres running life to compare you can go
ahead and apply Dinlog Tyre
Saver mix on the tyres of a single truck to check the
performance of Dinlog Tyre
Saver mix. Or simply have confidence on Dlog
Technologies who make the worlds only truly working Dinlog
Diesel Saver and apply
18.Q: Can I
apply Dinlog Tyre Saver mix
on rainy days?
A.: No. You cannot apply Dinlog Tyre Saver mix on wet tyres. Tyres must be dry and
clean to apply this mix.
19.Q: Can I
apply Dinlog Tyre Saver mix
on brand new tyres?
A.: Yes. Very
much. Then only you will get full benefits of savings.
20.Q: Can I
apply Dinlog Tyre Saver mix
on Retread tyres?
A: Yes. Certainly.
The life of rebuilt tyres is extended by 60%.
21.Q: Why I
need not apply on the sides of the Tyres?
A: The sides do not wear off. So no need to apply the mix on the sides of tyres.
22.Q:This
is very cheap product. Just Rs.12 how can I expect an increase of 6000kms over
usual running of 10000kms?
A: This is based on actual user
feedbacks received. This is just concentrate. As the user will have to spend on
Kerosene and application costs this appears cheaper.
23.Q: Can I
apply this mix to already 60% worn out Tyres?
A:Yes. The remaining life
gets extended by further 60%.
24.Q: How
this Dinlog
A; This Dinlog
Tyre Saver mix is a rubber strengthening catalyst.
This catalyst penetrates only up to 2 mm into the tyre
surface. Upon such penetration the rubber molecules are strengthened and they
become more rubberish. Good quality rubber can bear
any amount of beating and punching. Thus the top 2mm bears the rough ride and
enhances the tyre life. That is why the need to apply
at frequent intervals of every 10000kms or 5000kms.
25.Q: Will
this reduce my break efficiency?
A: No actually break efficiency is
enhanced. As rubber become more better rubber.
26.Q: 25.
Can I get Dinlog Tyre Saver
in our Town? How can I get this product?
One can get this product anywhere in